D-Link DGS-3612G Product Manual - Page 473

xStack® DGS-3600 Series Layer 3 Managed Gigabit Ethernet Switch Figure 8- 51. PIM RP Set Table window OSPF Monitor This section offers windows regarding OSPF (Open Shortest Path First) information on the Switch, including the OSPF LSDB Table, OSPF Neighbor Table and the OSPF Virtual Neighbor Table. OSPF Browse OSPF LSDB Table The OSPF LSDB Table displays the current link-state database in use by the OSPF routing protocol on a per-OSPF area basis. To view this table, click Monitoring > OSPF Monitor > OSPF > Browse OSPF LSDB Table, as shown below: Figure 8- 52. OSPF LSDB Table window The user may search for a specific entry by entering the following information into the fields at the top of the screen: To browse the OSPF LSDB Table window, you first must select which browse method you want to use in the Search Type field. The choices are All, Area ID, Advertise Router ID, LSDB, Area ID & Advertise Router ID, Area ID & LSDB, and Advertise Router ID & LSDB. If Area ID is selected as the browse method, users must enter the IP address in the Area ID field, and then click Find. If Adv. Router ID is selected, users must enter the IP address in the Adv. Router ID field, and then click Find. If LSDB is selected, users must select the type of link state (RTRLink, NETLink, Summary, ASSummary, ASExtLink and NSSA_EXT) in the LSDB Type field, and then click Find. The following fields are displayed in the OSPF LSDB Table: Parameter Description Area ID Adv. Router ID LSDB Type Allows the entry of an OSPF Area ID. This Area ID will then be used to search the table, and display an entry − if there is one. Displays the Advertising Router's ID. Displays which one of six types of link advertisements by which the current link was discovered by the Switch: Router link (RTRLink), Network link (NETLink), Summary link 457