D-Link DGS-3612G Product Manual - Page 67

xStack® DGS-3600 Series Layer 3 Managed Gigabit Ethernet Switch DHCP/BOOTP Relay Interface Settings This window allows the user to set up a server, by IP address, for relaying DHCP/ BOOTP information to the Switch. The user may enter a previously configured IP interface on the Switch that will be connected directly to the DHCP/BOOTP client using the following window. Properly configured settings will be displayed in the table at the bottom of the following window, once the user clicks the Add button under the Apply heading. The user may add up to four server IPs per IP interface on the Switch. To view this window, click Administration > DHCP/BOOTP Relay > DHCP/BOOTP Relay Interface Settings, as shown below: Figure 2- 49. DHCP/BOOTP Relay Interface Settings window The following parameters may be configured or viewed. Parameter Description Interface The IP interface on the Switch that will be connected directly to the Client. Server IP Enter the IP address of the DHCP/BOOTP server. Up to four server IPs can be configured per IP Interface 51