D-Link DGS-3612G Product Manual - Page 480

xStack® DGS-3600 Series Layer 3 Managed Gigabit Ethernet Switch Section 9 Switch Maintenance Reset Reboot System Save Services Logout Reset The Reset function has several options when resetting the Switch. Some of the current configuration parameters can be retained while resetting all other configuration parameters to their factory defaults. NOTE: Only the Reset System option will enter the factory default parameters into the Switch's non-volatile RAM, and then restart the Switch. All other options enter the factory defaults into the current configuration, but do not save this configuration. Reset System will return the Switch's configuration to the state it was when it left the factory Reset gives the option of retaining the Switch's User Accounts and History Log while resetting all other configuration parameters to their factory defaults. If the Switch is reset using this window, and Save Changes is not executed, the Switch will return to the last saved configuration when rebooted. Figure 9- 1. Reset window Reboot System The following window is used to restart the Switch. All of the configuration information entered from the last time Save Changes was executed will be lost. Click the Restart button to restart the Switch. Figure 9- 2. Reboot System window 464