D-Link DGS-3612G Product Manual - Page 253
DHCP Server Dynamic Binding, L3 Features > DHCP Server > DHCP Server Dynamic Binding
UPC - 790069296390
View all D-Link DGS-3612G manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 253 highlights
xStack® DGS-3600 Series Layer 3 Managed Gigabit Ethernet Switch DHCP Server Dynamic Binding The following window will allow users to view dynamically bound IP addresses of the DHCP server. These IP addresses are ones that were allotted to clients on the local network and are now bound to the device stated by its MAC address. To view this window, click L3 Features > DHCP Server > DHCP Server Dynamic Binding, as shown below: Figure 4- 80. DHCP Server Dynamic Binding Table window The following parameters may be configured or viewed. Parameter Description Pool Name To find the dynamically bound entries of a specific pool, enter the Pool Name into the field and click Find. Dynamically bound entries of this pool will be displayed in the table. To clear the corresponding Pool Name entries of this table, click Clear. To clear all entries, click Clear All. Pool Name This field will denote the Pool Name of the displayed dynamically bound DHCP entry. IP Address This field will display the IP address allotted to this device by the DHCP Server feature of this Switch. Hardware Address This field will display the MAC address of the device that is bound to the corresponding IP address. Type This field will display the type of node server being used for the previously configured Net BIOS Name server of this entry. Status This field will display the Status of the entry, whether it was dynamically bound or manually bound. Life Time (sec) This field will display, in seconds, the time remaining on the lease for this IP address. 237