D-Link DGS-3612G Product Manual - Page 46
System Severity Settings, System Severity Settings window, Parameter, Description
UPC - 790069296390
View all D-Link DGS-3612G manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 46 highlights
xStack® DGS-3600 Series Layer 3 Managed Gigabit Ethernet Switch System Severity Settings The Switch can be configured to allow alerts be logged or sent as a trap to an SNMP agent or both. The level at which the alert triggers either a log entry or a trap message can be set as well. Use the System Severity Settings window to set the criteria for alerts. The current settings are displayed in the lower half of the window. To view this window, click Administration > System Severity Settings, as shown below: Figure 2- 28. System Severity Settings window Use the drop-down menus to configure the parameters described below. Parameter Description System Severity Choose how the alerts are used from the drop-down menu. Select Log to send the alert of the Severity Type configured to the Switch's log for analysis. Choose Trap to send it to an SNMP agent for analysis. Select All to send the chosen alert type to an SNMP agent and the Switch's log for analysis. Severity Level Choose what level of alert will trigger sending the log entry or trap message as defined by the Severity Name. Select Emergency to send only Emergency events to the Switch's log or SNMP agent. Select Alert to send Emergency and alert events to the Switch's log or SNMP agent. Select Critical to send emergency, alert and critical events to the Switch's log or SNMP agent. Select Error to send error, critical, alert and emergency events to the Switch's log or SNMP agent. Select Warning to send warning, error, critical, alert and emergency events to the Switch's log or SNMP agent. Select Notice to send notice, warning, error, critical, alert and emergency events to the Switch's log or SNMP agent. Select Information to send information, notice, warning, error, critical, alert and emergency events to the Switch's log or SNMP agent. Select Debug to send debug, information, notice, warning, error, critical, alert and emergency events to the Switch's log or SNMP agent. Click Apply to implement the new System Severity Settings. 30