D-Link DXS-3600-32S CLI Guide - Page 12

DXS-3600 Series 10GbE Layer 2/3 Switch CLI Reference Guide 1-4 exit This command is used to exit any configuration mode to the next highest mode in the CLI mode hierarchy. Use the exit command in any configuration mode. If the current mode is the highest mode (Exec Mode, Privileged Mode) in the CLI mode hierarchy, execute the exit command to close the active terminal session by logging off the switch. exit Parameters Default Command Mode Command Default Level Usage Guideline None. None. Exec Mode Privileged Mode All Configuration Modes Level: 1 Use the exit command in the highest mode (Exec Mode, Privileged Mode) to exit the active session (exit from the mode process and log off from the device). If the current session is console, the account will logout. if there is another session running, it will be closed. Use the exit command in any configuration mode to the next highest mode in the CLI mode hierarchy. For example, use the exit command in global configuration mode to return to privileged mode. Example This example shows how to exit from the Line Configuration Mode to return to the Global Configuration Mode and exit from the Global Configuration Mode to return to the privileged mode. DXS-3600-32S(config-line)#exit DXS-3600-32S(config)#exit DXS-3600-32S# Example DXS-3600-32S#exit This example shows how to use the exit command, in the privileged mode, to logout of the current account. Switch con0 is now available Press any key to login... 16 2000-01-22 01:20:37 INFO(6) Logout through Console (Username: admin) DXS-3600-32S TenGigabit Ethernet Switch Command Line Interface Firmware: Build 1.10.023 Copyright(C) 2012 D-Link Corporation. All rights reserved. User Access Verification Username: Example DXS-3600-32S#exit This example shows how to use the exit command, in the privileged mode, in a Telnet session, to exit this mode and close the active session. 1-5 end This command is used to end the current configuration mode and return to the highest mode in the CLI mode hierarchy. Use the end command in any configuration mode. 4