D-Link DXS-3600-32S CLI Guide - Page 61

Parameters default list-name method DXS-3600 Series 10GbE Layer 2/3 Switch CLI Reference Guide When this parameter is used, the following defined method list is used as the default method for Exec accounting. Name of the Exec accounting method list. After the user-defined accounting method list created, you can use accounting exec line configuration command to apply the accounting method list to the specified terminal lines. Syntax "{none | group {radius | group_name}}". Up to four methods supported: none - Do not perform accounting. group - Can be followed by radius or a group_name "group radius" means use all RADIUS servers group "group group_name" is the specific group created via aaa group server global configuration command. Default Command Mode Command Default Level Usage Guideline The default option is disabled. Global Configuration Mode. Level: 15 It enables the exec accounting function after enabling the login authentication. After enabling the accounting function, it sends the account start information to the security server when the users log in the NAS CLI, and sends the account stop information to the security server when the users log out. If it does not send the account start information to the security server when a user logs in, it does not send the account stop information to the security server when a user logs out, either. The configured exec accounting method must be applied to the terminal line that needs accounting command; otherwise it is ineffective. Example This example shows how to perform accounting, of a managed user's activities, using RADIUS, and sends the accounting messages at the start and the end time of access. After the 'list-1' accounting method list has been created, you can use the Accounting EXEC Line Configuration command to apply this method list to the console, SSH, or to other terminals. DXS-3600-32S#configure terminal DXS-3600-32S(config)#aaa accounting exec list-1 start-stop group radius DXS-3600-32S(config)# 6-9 accounting exec This command is used to apply the exec accounting method list to the specified terminal lines in the line configuration mode. The no form of this command is used to disable the exec accounting function. accounting exec {default | list-name} no accounting exec Parameters default list-name Specifies to use the default method of Exec accounting. Specifies to use a defined Exec accounting method list. Default Command Mode Command Default Level By default, this feature is disabled. Line Configuration Mode. Level: 15 53