D-Link DXS-3600-32S CLI Guide - Page 589

Parameters privilege-level DXS-3600 Series 10GbE Layer 2/3 Switch CLI Reference Guide Specifies the privilege level used. If this value is not specified, then the default privilege level value will be used. Default Command Mode Command Default Level Usage Guideline The default privilege level is 15. EXEC Mode. Level: 1 When a user finds that some commands cannot be executed because the current level is lower than command's required level, the user can use this command to login to a higher level. If the privilege level have a password configured, the user needs to input the required password before access to the higher privilege level will be given. If the user inputs the incorrect password three times, the switch will stop requesting the user to input the password and return to current privilege level. Example DXS-3600-32S>enable 15 DXS-3600-32S# This example shows how to enable the privilege level of 15. 59-8 disable This command is used to leave a privilege level. disable [privilege-level] Parameters privilege-level Specifies the privilege level used. If this value is not specified, then the default privilege level value will be used. Default Command Mode Command Default Level Usage Guideline The default privilege level is 1. EXEC Mode. Level: 1 None. Example DXS-3600-32S#disable DXS-3600-32S> This example shows how to leave the privilege level. 59-9 enable password This command is used to create a privilege level password. enable password [level privilege-level] {password | encrypted encrypted-password} no enable password [level privilege-level] Parameters level privilege-level password encrypted Specifies the privilege level used. If not specified, the privilege level will set to 15. Specifies that a plain text password will be used. Specifies that the password will be encrypted. 581