D-Link DXS-3600-32S CLI Guide - Page 186

DXS-3600 Series 10GbE Layer 2/3 Switch CLI Reference Guide Example This example shows how to download the 'config.cfg' file from the TFTP server and replace the current running configuration with it. DXS-3600-32S#configure replace tftp: //10.0.0.66/config.cfg This will apply all necessary additions and deletions to replace the current running configuration with the contents of the specified configuration file, which is assumed to be a complete configuration, not a partial configuration. [y/n]: y Accessing tftp://10.0.0.66/config.cfg... Transmission start... Transmission finished, file length 45422 bytes. Executing script file config.cfg ...... Executing done DXS-3600-32S# Example This example shows how to download the 'config.cfg' file from the FTP server and replace the current running configuration with it. Execute the command immediately and not to confirm again. DXS-3600-32S#configure replace ftp: //user:[email protected]:80/config.cfg force Accessing ftp: //10.0.0.66/config.cfg... Transmission start... Transmission finished, file length 45422 bytes. Executing script file config.cfg ...... Executing done DXS-3600-32S# Example This example shows how to replace the current running configuration with the specified configuration file, called 'config.cfg', stored in the NVRAM of the device. Execute the command immediately and not to confirm again. DXS-3600-32S#configure replace flash: config.cfg force Executing script file config.cfg ...... Executing done DXS-3600-32S# Example This example shows how to reset current running configuration on device to original state. Execute the command immediately and not to confirm again. DXS-3600-32S#configure replace default force Changing current running configuration to default setting ...... Changing done DXS-3600-32S# 178