D-Link DXS-3600-32S CLI Guide - Page 88
clear ip bgp vpnv4
View all D-Link DXS-3600-32S manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 88 highlights
Parameters vrf VRF-NAME all IP-ADDRESS AS-NUMBER soft in prefix-filter out DXS-3600 Series 10GbE Layer 2/3 Switch CLI Reference Guide Specifies the VRF name. Specifies to reset all BGP sessions in the IPv4 VRF address family. Specifies to only reset the BGP neighbor with the IP address in the VRF address family. Specifies to only reset the BGP neighbor with the AS number in the VRF address family. (Optional) Specifies a soft reset. The session is not torn down. (Optional) Specifies an inbound reset. If neither the in nor out parameter is specified, both the inbound and outbound sessions are reset. (Optional) Clears the existing outbound route filter (ORF) prefix list to trigger a new route refresh or soft reconfiguration, which updates the ORF prefix list. (Optional) Specifies an outbound reset. If neither the in nor out parameters is specified, both inbound and outbound sessions are reset. Default Command Mode Command Default Level Usage Guideline None. Privileged Mode. Level: 8. (EI Mode Only Command) This command can be used to initiate a hard reset or soft reset of BGP neighbor sessions. If a hard reset is applied to the inbound session, the inbound session will be torn down and the local inbound routing table and the remote outbound routing table will be cleared. If a soft reset is applied to the inbound session, the session will not be rebuilt but the local inbound routing table will be cleared and needs to be rebuilt. If a soft reset inbound is enabled, then the routing table can be rebuilt based on the stored route updates information. If a soft reset inbound is disabled, then the local router will send the route refresh request to the neighbor to ask for the route refresh. When the inbound session is soft reset with the prefix filter option, and the capability orf prefix-list is enabled in the send direction, then the local BGP will send 'clear the routing table', and notify the remote neighbor for the prefix filter. This command can only take effect for the sessions in VRF address family. Example In the following example, a soft reset is initiated for the inbound session for all neighbors those have been created in the view of vrf and the outbound session is unaffected. DXS-3600-32S#clear ip bgp vrf VPN-A all soft in DXS-3600-32S# 7-24 clear ip bgp vpnv4 This command is used to reset BGP connections using a soft reset for IPv4 VPN address family sessions. clear ip bgp vpnv4 unicast {all | IP-ADDRESS } [soft [{in [prefix-filter] | out}]] Parameters all IP-ADDRESS Specifies to reset all BGP sessions in VPN address family. Specifies to only reset the BGP neighbor with the IP address. 80