D-Link DXS-3600-32S CLI Guide - Page 545

DXS-3600 Series 10GbE Layer 2/3 Switch CLI Reference Guide Example This example shows how to specify the number of SSH authentication retry times to 5. DXS-3600-32S#configure terminal DXS-3600-32S(config)#ip ssh authentication-retries 5 DXS-3600-32S(config)# 54-3 ip ssh port This command is used to specify the TCP port number on which SSH server listens. Use the no form of this command to reset the TCP port number to the default value 22. ip ssh port no ip ssh port Parameters port Specifies the TCP port number on which the SSH server listens. This port number can not be well-known port number and can no be occupied by other applications. Default Command Mode Command Default Level Usage Guideline The default TCP port number for the SSH server is 22. Global Configuration Mode. Level: 8 By default, the SSH server listens on TCP port number 22. If you want it to listen on other TCP port number in order to avoid regular SSH attacks or for other personal reasons, you can change the TCP port number to any one you like, but just make sure that the configured TCP port number is not occupied by other applications. Example This example shows how to specify the TCP port number of the SSH server to 2244. DXS-3600-32S#configure terminal DXS-3600-32S(config)#ip ssh port 2244 DXS-3600-32S(config)# 54-4 ip ssh server enable This command is used to enable the SSH server on the switch. Use the no form of this command to disable the SSH server on the switch. ip ssh server enable no ip ssh server Parameters Default Command Mode Command Default Level Usage Guideline None. The SSH server is disabled by default. Global Configuration Mode. Level: 8 This command is used to enable SSH server on the switch in order to execute switch management in secure manner. 537