D-Link DXS-3600-32S CLI Guide - Page 468

DXS-3600 Series 10GbE Layer 2/3 Switch CLI Reference Guide Example This example displays all the interface's neighbor information. DXS-3600-32S#show ip pim neighbor Neighbor Address Interface Uptime Expires Mode 10.2.0.2 vlan1 00:00:32 00:01:26 SM Total Entries: 1 DXS-3600-32S# Display Parameters Neighbor Address Interface Uptime Expires Mode Description Specify the neighbor's address. Specify the name of interface binding by the neighbor. Length of time (in hours, minutes, and seconds) that the router has known about this neighbor. Time (in hours, minutes, and seconds) this neighbor expires. The mode of this interface. To configure this value, use command ip pim. 47-15 show ip pim sparse-mode bsr-router This command is used to display PIM-SM bootstrap router information. show ip pim sparse-mode bsr-router Parameters Default Command Mode Command Default Level Usage Guideline None. None. Privileged EXEC Mode. Level: 3. (EI Mode Only Command) This command is used to show BSR information. Example This example displays PIM BSR information. DXS-3600-32S#show ip pim sparse-mode bsr-router PIMv2 Bootstrap information This System is the Bootstrap Router (BSR) BSR Address: 10.90.90.90 BSR Priority: 100, Hash mask length: 30 Role: Candidate BSR Priority: 100 Hash mask lenth: 30 Next bootstrap message in 00:00:17 state: Elected BSR Candidate RP: 10.90.90.90(vlan1) Group acl: crp-system Candidate RP: 172.16.11.254(vlan2) Group acl: crp-acl Candidate RP priority : 192 Holdtime 150 seconds Advertisement interval 60 seconds Next Cand_RP_advertisement in 00:00:15 DXS-3600-32S# Display Parameters BSR Address Description IP address of the bootstrap router. 460