D-Link DXS-3600-32S CLI Guide - Page 568

DXS-3600 Series 10GbE Layer 2/3 Switch CLI Reference Guide Default Command Mode Command Default Level Usage Guideline The default mode is RSTP. Global Configuration Mode. Level: 8 If mode is configured as STP or RSTP, all currently running MSTP instances will be cancelled automatically. If the newly configured mode is changed from the previous one, the spanning-tree state machine will restart again, therefore all of the stable spanning-tree port states will transit into discarding states. Example This example shows how to configure the running version of STP module to RSTP. DXS-3600-32S#configure terminal DXS-3600-32S(config)#spanning-tree mode rstp Success DXS-3600-32S(config)# 12 2000-02-15 00:46:00 INFO(6) Spanning Tree version change (new version:RSTP ) DXS-3600-32S(config)# 57-7 spanning-tree mst configure This command is used to enter the MST configuration mode in the global configuration mode and configure the MSTP region. Use the no form of the command to restore all parameters (name, revision, vlan map) to the default values. spanning-tree mst configure no spanning-tree mst configure Parameters Default Command Mode Command Default Level Usage Guideline None. By default, all VLANs are mapped to the CIST (instance 0), name is 'bridge mac', and the revision is 0. Global Configuration Mode. Level: 3 The MST configuration consists of three main parameters: • Instance VLAN mapping - See the instance command • Region name - See the name (MST configuration mode) command • Configuration revision number - See the revision (MST configuration mode) command The exit command is used to leave MST configuration mode. Example This example shows how to enter the MST configuration mode in the global configuration. DXS-3600-32S#configure terminal DXS-3600-32S(config)#spanning-tree mst configure Success DXS-3600-32S(config-mst)# 560