D-Link DXS-3600-32S CLI Guide - Page 509

DXS-3600 Series 10GbE Layer 2/3 Switch CLI Reference Guide Example This example shows the output for the show RADIUS authentication & accounting server hosts command. DXS-3600-32S#show radius-server configuration IP-Address Auth-Port Acct-Port Key Retransmit Timeout 192.168.12.1 1812 1813 Default Key:aaa Default Retransmit:4 Default Timeout:10 1 RADIUS server(s) in total DXS-3600-32S# Display Parameters IP-Address Auth-Port Acct-Port Key Retransmit Timeout Default Key Default Retransmit Default Timeout Description IP address of the RADIUS security server host. UDP port used for RADIUS authentication. UDP port used for RADIUS accounting. A shared password for the network access server (device) to communicate with the RADIUS security server. The number of packet retransmissions before the device considers that the RADIUS security server does not respond. Set the time for the device to wait for a response from the security server after retransmitting the RADIUS packet. The unit is seconds. A default shared password for the network access server (device) to communicate with the RADIUS security server The default number of packet retransmissions before the device considers that the RADIUS security server does not respond. The default time for the device to wait for a response from the security server after retransmitting the RADIUS packet. 501