D-Link DXS-3600-32S CLI Guide - Page 605

DXS-3600 Series 10GbE Layer 2/3 Switch CLI Reference Guide Time Range Commands 63-1 time-range This command is used to enter the Time Range configuration mode in the global configuration mode. To delete a time range, use the no to form of this command. time-range no time-range Parameters range_name 32 Specifies the time range name string in the range of 1 to 32. Default Command Mode Command Default Level Usage Guideline None. Global Configuration Mode. Level: 8 In the time range configuration mode, the time range can be configured periodically. Use the no time-range command to delete the time range. If the time range is binded to an ACL profile or a PoE port (if PoE is supported), the deletion will fail. Example This example shows how to enter time range configure mode. DXS-3600-32S#configure terminal DXS-3600-32S(config)#time-range a DXS-3600-32S(config-time-range)# Example This example shows how to delete a time range. DXS-3600-32S#configure terminal DXS-3600-32S(config)#no time-range a Success DXS-3600-32S(config)# 63-2 periodic This command is used to configure the time range. periodic HH:MM to HH:MM Parameters daylist HH:MM Specifies the day list string used. Options to choose from are sun, mon, tue, wen, thu, fri and sat. Specifies the start or end time used. The range is from 00:00 to 23:59. Default Command Mode Command Default Level Usage Guideline The maximum number of the time range is 64. Time Range Configuration Mode. Level: 8 This command configures the time range. If the time range already exists, this command will modify the configuration. If not, this command will add a time range. To verify your configuration, use show time-range. 597