D-Link DXS-3600-32S CLI Guide - Page 416

DXS-3600 Series 10GbE Layer 2/3 Switch CLI Reference Guide Default Command Mode Command Default Level Usage Guideline By default, the OSPF interface state debug switch is turned off. Privileged EXEC Mode. Level: 15. (EI Mode Only Command) Use this command to turn on or turn off OSPF interface state debug switch. When OSPF interface state changes or some events happen to change interface state, debug information will print. When DR selection happens, debug information will also print if OSPF debug function is turned on. Use the command debug ip ospf to turn on the OSPF debug function. Example This example shows how to turn on the OSPF interface state debug switch. DXS-3600-32S#debug ip ospf interface DXS-3600-32S# intf 10.1.1.1 up tic 10 intf 100.1.1.1 down tic 20 OSPF: Select DR: 2.2.2.2 OSPF: Select BDR: 1.1.1.1 40-34 debug ip ospf lsa-originating This command is used to turn on the OSPF LSA originating debug switch. Use the no form of the command to turn off the OSPF LSA originating debug switch. debug ip ospf lsa-originating no debug ip ospf lsa-originating Parameters Default Command Mode Command Default Level Usage Guideline None. By default, the OSPF LSA originating debug switch is turned off. Privileged EXEC Mode. Level: 15. (EI Mode Only Command) Use this command to turn on or turn off OSPF LSA originating debug switch. When LSA is originated, debug information will be print if OSPF debug function is turned on. Use the command debug ip ospf to turn on the OSPF debug function. Example This example shows how to turn on the OSPF LSA originating debug switch. DXS-3600-32S#debug ip ospf lsa-originating DXS-3600-32S# Build Router LSA id 100.1.1.2 for area 0.0.0.0 seq 80000001 tic 10 40-35 debug ip ospf lsa-flooding This command is used to turn on the OSPF LSA flooding debug switch. Use the no form of the command to turn off the OSPF LSA flooding debug switch. debug ip ospf lsa-flooding no debug ip ospf lsa-flooding Parameters None. 408