D-Link DXS-3600-32S CLI Guide - Page 220

DXS-3600 Series 10GbE Layer 2/3 Switch CLI Reference Guide Example This example shows how to define a DHCP address pool with the name 'mypool0'. DXS-3600-32S#configure terminal DXS-3600-32S(config)#ip dhcp pool mypool0 DXS-3600-32S(dhcp-config)# 14-13 lease This command is used to define the lease time of the IP address that the DHCP server assigns to the client in the DHCP address pool configuration mode. The no form of this command can be used to restore it to the default configuration. lease {days [hours] [minutes] | infinite} no lease Parameters days hours minutes infinite Specifies the lease time in days. (Optional) Specifies the lease time in hours. It is necessary to define the days before defining the hours. (Optional) Specifies the lease time in minutes. It is necessary to define the days and hours before defining the minutes. Specifies an infinite lease time used. Default Command Mode Command Default Level Usage Guideline The lease is 1 days, by default. DHCP Address Pool Configuration Mode. Level: 8 When the lease is getting near to expire, the DHCP client will send the request of renewal of lease. In general, the DHCP server will allow the renewal of lease of the original IP address. Example This example shows how to set the DHCP lease to 1 hour. DXS-3600-32S#configure terminal DXS-3600-32S(config)#ip dhcp pool pool1 DXS-3600-32S(dhcp-config)#lease 0 1 DXS-3600-32S(dhcp-config)# Example This example shows how to set the DHCP lease to 1 minute. DXS-3600-32S#configure terminal DXS-3600-32S(config)#ip dhcp pool pool1 DXS-3600-32S(dhcp-config)#lease 0 0 1 DXS-3600-32S(dhcp-config)# 14-14 netbios-name-server This command is used to configure the WINS name server of the Microsoft DHCP client NETBIOS in the DHCP address pool configuration mode. The no form of this command can be used to delete the WINS server. netbios-name-server ip-address [ip-address2 [ip-address3]] no netbios-name-server 212