D-Link DXS-3600-32S CLI Guide - Page 420

Usage Guideline DXS-3600 Series 10GbE Layer 2/3 Switch CLI Reference Guide Use this command to turn on or turn off OSPF route debug switch. When one OSPF route is added, updated or deleted, the debug information will be print if OSPF debug function is turned on. Use the command debug ip ospf to turn on the OSPF debug function. Example This example shows how to turn on the OSPF route debug switch. DXS-3600-32S#debug ip ospf route DXS-3600-32S# Add an OSPF route level 1 dst 172.18.1.1 mask 255.255.255.0 nh cnt 1 cost 10 cost2: 0 tic: 300 40-42 debug ip ospf redistribution This command is used to turn on the OSPF redistribution debug switch. Use the no form of the command to turn off the OSPF redistribution debug switch. debug ip ospf redistribution no debug ip ospf redistribution Parameters Default Command Mode Command Default Level Usage Guideline None. By default, the OSPF redistribution switch is turned off. Privileged EXEC Mode. Level: 15. (EI Mode Only Command) Use this command to turn on or turn off OSPF redistribution debug switch. When one route of other protocol is redistributed into OSPF or not redistributed into OSPF any more, the debug information will be print if OSPF debug function is turned on. Use the command debug ip ospf to turn on the OSPF debug function. Example This example shows how to turn on the OSPF redistribution debug switch. DXS-3600-32S#debug ip ospf redistribution DXS-3600-32S# Import AS external route from src 5 net 192.1.1.1 mask 255.255.255.0 type 2 cost 50 fwd 10.1.1.100 tic 500 40-43 debug ip ospf show counter This command is used to display the OSPF statistic counter. debug ip ospf show counter [packet | neighbor | spf] Parameters packet neighbor spf Specifies to display the OSPF packet counter. Specifies to display the OSPF neighbor counter. Specifies to display the OSPF SPF event counter. Default Command Mode None. Privileged EXEC Mode. 412