D-Link DXS-3600-32S CLI Guide - Page 66

method radius DXS-3600 Series 10GbE Layer 2/3 Switch CLI Reference Guide Syntax "{none | group {radius | group_name}}". Up to four methods supported: none - Specifies not tp perform authorization. group - Specifies to be followed by radius or a group name. "group radius" means to use all RADIUS servers group. "group group_name" means to use a specific RADIUS group, created by means of the aaa group server radius global configuration command. Specifies to use the RADIUS group for accounting. Default Command Mode Command Default Level Usage Guideline By default, this feature is disabled. Global Configuration Mode. Level: 15 It performs accounting of user activities by sending record attributes to the security server. Use the keyword start-stop to set the user accounting option. Example This example shows how to perform the accounting of a network service request, from users, using RADIUS, and sends accounting messages at the start and the end time of access. DXS-3600-32S#configure terminal DXS-3600-32S(config)#aaa accounting network default start-stop group radius DXS-3600-32S(config)# 6-16 aaa group server This command is used to configure the AAA server group. The no form of this command is used to delete the server group. aaa group server {radius | tacacs+} name no aaa group server {radius | tacacs+} name Parameters name Enter the name of the server group. It cannot be the keywords "radius" and "tacacs+". Default Command Mode Command Default Level Usage Guideline None. Global Configuration Mode. Level: 15 This command is used to configure the AAA server group. Currently, the RADIUS and TACACS+ server groups are supported. Example This example shows how to configure an AAA server group named 'group-1'. DXS-3600-32S#configure terminal DXS-3600-32S(config)#aaa group server radius group-1 DXS-3600-32S(config-sg-radius)# 6-17 server This command is used to add a server to the AAA server group. The no form is used to delete a server. server ip-addr no server ip-addr 58