D-Link DXS-3600-32S CLI Guide - Page 45

DXS-3600 Series 10GbE Layer 2/3 Switch CLI Reference Guide Command Default Level Usage Guideline Level: 12 One submap can only be associated with an IP ACL or a MAC ACL. You can not associate a submap with both an IP ACL and a MAC ACL. One submap can only be associated with at most 8 ACLs. One submap can not be associated with an non-existent ACL. One submap can not be associated with an ACL, which is NULL ACL. Example This example shows how to configure matching content in the submap. DXS-3600-32S(config)# vlan access-map vlan-map 20 DXS-3600-32S(config-access-map)# match ip address 10 20 sp1 30 sp2 DXS-3600-32S(config-access-map)# end DXS-3600-32S# show vlan access-map VLAN access-map vlan-map 20 match ip address: 10,20,sp1,30,sp2 action: forward DXS-3600-32S# configure terminal DXS-3600-32S(config)# vlan access-map vlan-map 30 DXS-3600-32S(config-access-map)# match mac address 6710 6720 ext_mac 7760 DXS-3600-32S(config-access-map)# end DXS-3600-32S# show vlan access-map VLAN access-map vlan-map 20 match ip address: 10,20,sp1,30,sp2 action: forward VLAN access-map vlan-map 30 match mac address: 6710,6720,ext_mac,7760 action: forward DXS-3600-32S# 3-25 action This command is used to set the forwarding, drop, and redirect actions of submaps in the VACL mode. Use the no command to return to the default configuration. action forward no action forward action drop no action drop action redirect {port_id} no action redirect {port_id} Parameters port_id Specifies the redirection port used. Default Command Mode Command Default Level Usage Guideline Default action is forward. Access-map Configuration Mode. Level: 12 One submap has only one action. The submap action is applied to all the associated ACLs. 37