D-Link DXS-3600-32S CLI Guide - Page 415

DXS-3600 Series 10GbE Layer 2/3 Switch CLI Reference Guide 40-31 debug ip ospf This command is used to turn on OSPF debug function. Use the no form of this command to turn off OSPF debug function. debug ip ospf no debug ip ospf Parameters Default Command Mode Command Default Level Usage Guideline None. By default OSPF debug function is turned off. Privileged EXEC Mode. Level: 15. (EI Mode Only Command) Use this command to turn on or turn off OSPF debug function while the global debug function has been turned on before. Example This example shows how to turn on the OSPF debug function. DXS-3600-32S#debug ip ospf DXS-3600-32S# 40-32 debug ip ospf neighbor This command is used to turn on the OSPF neighbor state debug switch. Use the no form of the command to turn off the OSPF neighbor state debug switch. debug ip ospf neighbor no debug ip ospf neighbor Parameters Default Command Mode Command Default Level Usage Guideline None. By default, the OSPF neighbor state debug switch is turned off. Privileged EXEC Mode. Level: 15. (EI Mode Only Command) Use this command to turn on or turn off OSPF neighbor state debug switch. When neighbor state changes or some events happen to change neighbor state, debug information will print if OSPF debug function is turned on. Use the command debug ip ospf to turn on the OSPF debug function. Example This example shows how to turn on the OSPF neighbor state debug switch. DXS-3600-32S#debug ip ospf neighbor DXS-3600-32S# NBR 2.2.2.2 state change from LOADING to FULL tic 100 NBR 3.3.3.3 state change from FULL to DOWN tic 100 40-33 debug ip ospf interface This command is used to turn on the OSPF interface state debug switch. Use the no form of the command to turn off the OSPF interface state debug switch. debug ip ospf interface no debug ip ospf interface Parameters None. 407