D-Link DXS-3600-32S CLI Guide - Page 231

DXS-3600 Series 10GbE Layer 2/3 Switch CLI Reference Guide Display Parameters Generation ID Expire Time Description Specify the generation ID of the neighbor. This value is dynamically generated by the neighbor switch, and it is used for the local switch to detect that whether the neighbor has restarted or not After this time, the neighbor will be aged out if no new probe message received from the neighbor. 15-5 show ip dvmrp route This command is used to display the DVMRP route info. show ip dvmrp route [IPADDRESS MASK] Parameters IPADDRESS MASK Specifies IP address. Together with the parameter MASK, specify displaying the route info for the specified network. Specifies the mask of the IP address. Default Command Mode Command Default Level Usage Guideline None. Privileged EXEC Mode. Level: 3. (EI Mode Only Command) This command is used to display route information learned by DVMRP. If no parameter added, this command will display all the route information on the switch. Example This example shows how to display all the route information learned by DVMRP. DXS-3600-32S#show ip dvmrp route DVMRP Routing Table Source Address/Netmask Upstream Neighbor 2.0.0.0/8 10.90.90.90 10.0.0.0/8 10.90.90.2 Metric -----2 1 Learned ------Dynamic Local Interface Expire vlan1 00:01:22 vlan1 - Total Entries: 2 DXS-3600-32S# Example This example shows how to display routing information of 10.3.3.3 and mask 255.0.0.0 DXS-3600-32S#show ip dvmrp route 10.3.3.3 255.0.0.0 DVMRP Routing Table Source Address/Netmask Upstream Neighbor Metric Learned Interface Expire 10.0.0.0/8 10.90.90.2 1 Local vlan1 - Total Entries: 1 DXS-3600-32S# 223