Dell Dimension 9200 Owner's Manual - Page 126
Controls and Lights, Power, Physical, Product Information Guide - blinking amber light
View all Dell Dimension 9200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 126 highlights
Controls and Lights Power control push button Power light green light - Blinking green in sleep state; solid green for poweron state. amber light - Blinking amber indicates a problem with the power supply inside the computer. If the system cannot boot and there is a solid amber light, this indicates a problem with the system board (see "Power Problems" on page 71). Hard-drive access light green Link integrity light (on integrated network adapter) green light - A good connection exists between a 10-Mbps network and the computer. orange light - A good connection exists between a 100-Mbps network and the computer. off (no light) - The computer is not detecting a physical connection to the network. Activity light (on integrated network yellow light - Blinking indicates activity on the network. adapter) Diagnostic lights four lights on the front panel (see "Diagnostic Lights" on page 49) Standby power light AUXPWR on the system board Power DC power supply: Wattage 375 W Heat dissipation 1280 BTU/hr NOTE: Heat dissipation is calculated based upon the power supply wattage rating. Voltage (see the safety instructions in the Product Information Guide for important voltage setting information) Manual switched power supply: 90 to 135 V and 180 to 265 V at 50/60 Hz Backup battery 3-V CR2032 lithium coin cell Physical Height Width Depth Weight 46.05 cm (18.13 in) 18.75 cm (7.38 in) 45.42 cm (17.88 in) 12.7 kg (28 lb) 126 Appendix