Dell Dimension 9200 Owner's Manual - Page 32
IEEE 1394 (Optional), Power Management, Overview, Standby Mode - pci slots
View all Dell Dimension 9200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 32 highlights
To use the Media Card Reader: 1 Check the media or card to determine the proper orientation for insertion. 2 Slide the media or card into the appropriate slot until it is completely seated in the connector. If you encounter resistance, do not force the media or card. Check the card orientation and try again. IEEE 1394 (Optional) IEEE 1394 is a digital interface that can move large amounts of data between computers and peripheral devices. IEEE 1394 is ideal for use with multimedia devices because it speeds the transfer of data and large files, which enables a computer to connect directly to devices such as digital video cameras. NOTE: The connector can accept 4-pin IEEE 1394 devices with the use of an adapter. Your computer may have an optional front IEEE 1394 connector. This connector is only available if you purchased an add-in card that uses IEEE 1394. To purchase a card, contact Dell. Power Management Overview The Microsoft® Windows® XP power management features can reduce the amount of electricity your computer uses when it is on and you are not using it. You can reduce power to just the monitor or the hard drive, or you can use standby mode or hibernate mode to reduce power to the entire computer. When the computer exits from a power conservation mode, it returns to the operating state it was in prior to entering the mode. NOTE: Windows XP Professional includes security and networking features not available in Windows XP Home Edition. When a Windows XP Professional computer is connected to a network, different options related to security and networking appear in certain windows. NOTE: The procedures to activate the standby and hibernate modes may vary according to your operating system. Standby Mode Standby mode conserves power by turning off the display and the hard drive after a designated period of time, known as a time-out. When the computer exits from standby mode, it returns to the operating state it was in prior to entering standby mode. NOTICE: If your computer loses power while in standby mode, it may lose data. NOTICE: The graphics card in your computer is installed in the PCI Express x16 slot. When there is a card in this slot and you add a peripheral that does not support s3 suspend, your computer will not enter standby mode. To set standby mode to automatically activate after a defined period of inactivity: 1 Click the Start button, then click Control Panel. 2 Define your standby settings on the Power Schemes Tab and Advanced Tab. 32 Setting Up and Using Your Computer