Dell External OEMR R620 Owners Manual - Page 79
Removing the System Battery Cover, To remove the battery
View all Dell External OEMR R620 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 79 highlights
1. Turn off the system, including any attached peripherals, and disconnect the system from the electrical outlet and peripherals. 2. Open the system. 3. Press the touch points and lift the system battery cover up and away from the network daughter card cooling shroud. Figure 37. Removing the System Battery Cover 1. system battery cover 2. network daughter card cooling shroud 3. touch points 4. Locate the battery socket. CAUTION: To avoid damage to the battery connector, you must firmly support the connector while installing or removing a battery. 5. To remove the battery, press down firmly on the positive side of the connector and lift the battery out of the securing tabs at the negative side of the connector. Figure 38. Replacing the System Battery 1. positive side of battery connector 2. system battery 3. negative side of battery connector 79