Dell Force10 E600i FTOS Version 8.4.1.5 Configuration Guide for ExaScale - Page 1093

Message 8 Parity Error Correction Enabled %RPM0-P: CP %CHMGR-5-PARITY_CORRECTION: FPC parity correction feature will be on next reload. Message 9 Parity Error Correction Enabled [1/1 0:0:25] LCMGR-(lcMgr):lcMgrSetParityCorrection(): Enable parity correction [5/15 16:13:14] LCMGR-(lcMgr):lcMgrSetParityCorrection(): Disable parity correction FTOS#show processes memory lp 9 Total: 197534888, MaxUsed: 112999116, CurrentUsed: 87782876, CurrentFree: 109752012 TaskName TotalAllocated TotalFreed MaxHeld CurrentHolding ppdT2lSramP 25169040 25165840 25169040 3200 Recognize a transient parity error FTOS generates a message similar to Message 10 and Message 11 when it encounters a phantom or recoverable transient parity error. Message 10 Console Phantom Transient Parity Error Message Apr 29 18:01:24: %EXW16PG:6 %POLLMGR-5-FPC_NOTIFY: Line card detected FPC 6 parity Transient phantom Message 11 Console Recoverable Transient Parity Error Message Apr 29 18:01:05: %EXW16PG:6 %POLLMGR-5-FPC_NOTIFY: Line card detected FPC 6 parity Transient recoverable The line card status does not reflect transient errors until FTOS encounters five recoverable or 50 phantom transient errors on a card within an hour, as shown in the following example. The text "Last Event" indicates the last type of parity error (transient or real) that occurred. Use SNMP to poll the number of transient errors using the objects chSysCardParityPhantomError and chSysCardParityRecoverableError. If it has been more than one hour since the last occurrence of the same type of error, the counter associated with that type of error is reset to 1. FTOS#show linecard 6 -- Line card 6 -- Status : online Next Boot : online Required Type : E48TF - 48-port 10/100/1000Base-T line card with RJ-45 interfaces (EF) Current Type : E48TF - 48-port 10/100/1000Base-T line card with RJ-45 interfaces (EF) Hardware Rev : Base - 1.1 PP0 - 1.0 PP1 - 1.0 Num Ports : 48 Up Time : 3 min, 44 sec FTOS Version : 6.5.4.1 E-Series TeraScale Debugging and Diagnostics | 1093