Dell Force10 E600i FTOS Version 8.4.1.5 Configuration Guide for ExaScale - Page 895

FTOS Options for Trunk Ports 802.1ad trunk ports may also be tagged members of a VLAN so that it can carry single and double-tagged traffic. You can enable trunk ports to carry untagged, single-tagged, and double-tagged VLAN traffic by making the trunk port a hybrid port. Step 1 2 Task Configure a trunk port to carry untagged, single-tagged, and double-tagged traffic by making it a hybrid port. Note: Note: On the C-Series and S-Series, a trunk port can be added to an 802.1Q VLAN as well as a Stacking VLAN only when the TPID 0x8100. Add the port to a 802.1Q VLAN as tagged or untagged. Command Syntax portmode hybrid [tagged | untagged] Command Mode INTERFACE INTERFACE VLAN In the example below GigabitEthernet 0/1 a trunk port that is configured as a hybrid port and then added to VLAN 100 as untagged VLAN 101 as tagged, and VLAN 103, which is a stacking VLAN. FTOS(conf)#int gi 0/1 FTOS(conf-if-gi-0/1)#portmode hybrid FTOS(conf-if-gi-0/1)#switchport FTOS(conf-if-gi-0/1)#vlan-stack trunk FTOS(conf-if-gi-0/1)#show config ! interface GigabitEthernet 0/1 no ip address portmode hybrid switchport vlan-stack trunk shutdown FTOS(conf-if-gi-0/1)#interface vlan 100 FTOS(conf-if-vl-100)#untagged gigabitethernet 0/1 FTOS(conf-if-vl-100)#interface vlan 101 FTOS(conf-if-vl-101)#tagged gigabitethernet 0/1 FTOS(conf-if-vl-101)#interface vlan 103 FTOS(conf-if-vl-103)#vlan-stack compatible FTOS(conf-if-vl-103-stack)#member gigabitethernet 0/1 FTOS(conf-if-vl-103-stack)#do show vlan Codes: * - Default VLAN, G - GVRP VLANs Q: U - Untagged, T - Tagged x - Dot1x untagged, X - Dot1x tagged G - GVRP tagged, M - Vlan-stack NUM * 1 100 101 103 Status Inactive Inactive Inactive Inactive Description Q Ports U Gi 0/1 T Gi 0/1 M Gi 0/1 Service Provider Bridging | 895