Dell Force10 E600i FTOS Version 8.4.1.5 Configuration Guide for ExaScale - Page 747

FTOS#sh run int gigabitethernet 6/11 ! interface GigabitEthernet 6/11 description "IP Phone X" no ip address portmode hybrid switchport service-policy input HonorDSCP power inline auto no shutdown FTOS#sh run | grep strict-priority strict-priority unicast 2 Honor the incoming dot1p value On the C-Series, if you know traffic originating from the phone is tagged with a dot1p value of 5, you might make the associated queue a strict priority queue, as shown in the example below; on the C-Series, FTOS maps dot1p priority 5 to queue 2. FTOS#sh run int gi 6/10 ! interface GigabitEthernet 6/10 description "IP Phone X" no ip address portmode hybrid switchport service-class dynamic dot1p power inline auto no shutdown FTOS#sh run | grep strict-priority strict-priority unicast 2 Classifying VOIP traffic and applying QoS policies Avoid congestion and give precedence to voice and signaling traffic by classifying traffic based on subnet and using strict priority and bandwidth weights on egress, as outlined in the steps below. Figure 39-5 depicts the topology and shows the configuration for a C-Series. The steps are the same on an S-Series. The output example below the figure is a screenshot showing some of the steps and the resulting running-config. Power over Ethernet | 747