Dell Force10 E600i FTOS Version 8.4.1.5 Configuration Guide for ExaScale - Page 155

IPv4 and IPv6 ACLs and prefixes and MAC ACLs can be resequenced. No CAM writes happen as a result of resequencing, so there is no packet loss; the behavior is like Hot-lock ACLs. Note: ACL Resequencing does not affect the rules or remarks or the order in which they are applied. It merely renumbers them so that new rules can be placed within the list as desired. Table 10-3. ACL Resequencing Example (Insert New Rules) seq 5 permit any host 1.1.1.1 seq 6 permit any host 1.1.1.2 seq 7 permit any host 1.1.1.3 seq 10 permit any host 1.1.1.4 Table 10-4. ACL Resequencing Example (Resequenced) seq 5 permit any host 1.1.1.1 seq 10 permit any host 1.1.1.2 seq 15 permit any host 1.1.1.3 seq 20 permit any host 1.1.1.4 Resequencing an ACL or Prefix List Resequencing is available for IPv4 and IPv6 ACLs and prefix lists and MAC ACLs. To resequence an ACL or prefix list use the appropriate command in Table 10-5, "Resequencing ACLs and Prefix Lists," in IP Access Control Lists (ACL), Prefix Lists, and Route-maps. You must specify the list name, starting number, and increment when using these commands. Table 10-5. Resequencing ACLs and Prefix Lists List IPv4, IPv6, or MAC ACL IPv4 or IPv6 prefix-list Command resequence access-list {ipv4 | ipv6 | mac} {access-list-name StartingSeqNum Step-to-Increment} resequence prefix-list {ipv4 | ipv6} {prefix-list-name StartingSeqNum Step-to-Increment} Command Mode Exec Exec IP Access Control Lists (ACL), Prefix Lists, and Route-maps | 155