Dell Force10 E600i FTOS Version 8.4.1.5 Configuration Guide for ExaScale - Page 303

Configuring FTOS to Rollback to a Previous Configuration. FTOS#configure replace archive_0 time ? Time value (in seconds) FTOS#configure replace archive_0 time 60 This will apply all nessesary additions and deletions to replace the current running-config with the contents of the specified configuration file, which is assumed to be complete configuration, not a partial configuration Please confirm if you want to proceed [yes/no]:yes 3d4h45m: %RPM0-P:CP %CLI-6-RBACKSTART: start rollback to file flash:/CFGARCH_DIR/ archive_0 3d4h45m: %RPM0-P:CP %SYS-5-CONFIG_LOAD: Loading configuration file 3d4h45m: %RPM0-P:CP %CLI-6-RBACKCOMPLETE: completed rollback to flash:/CFGARCH_DIR/ archive_0 R1# R1#Warning: time is expired before confirm. Replace with flash://CFGARCH_DIR/archive_1 FTOS# Committing to an Archived Configuration. FTOS#config replace archive_0 time 60 This will apply all nessesary additions and deletions to replace the current running-config with the contents of the specified configuration file, which is assumed to be complete configuration, not a partial configuration Please confirm if you want to proceed [yes/no]:yes 3d5h26m: %RPM0-P:CP %CLI-6-RBACKSTART: start rollback to file flash:/CFGARCH_DIR/ archive_0 3d5h26m: %RPM0-P:CP %SYS-5-CONFIG_LOAD: Loading configuration file 3d5h26m: %RPM0-P:CP %CLI-6-RBACKCOMPLETE: completed rollback to flash:/CFGARCH_DIR/ archive_0 R1#configure confirm Configuring an Archive File Maximum The maximum number of archive files is configurable between 2 and 15. Default maximum is 10. Use the command maximum from ARCHIVE mode to configure this parameter, as shown in the first example. • If you attempt to archive more configurations than the maximum allowed, the oldest archived configuration is deleted (refer to the second example) to create space. However, the number in the name of the archived file is still incremented (up to 14, after which the numbering convention restarts at 0; if present, archive_0 is overwritten). • If you configure a maximum less than the number of archived files you already have, then archived files are deleted to satisfy the maximum. Configuring an Archive Maximum. R1(conf-archive)#maximum 2 R1(conf-archive)#show config ! archive maximum 2 R1(conf-archive)# Configuration Replace and Rollback | 303