Dell Force10 E600i FTOS Version 8.4.1.5 Configuration Guide for ExaScale - Page 391

Upgrade result All cache boot image upgraded to 4.7.5.427 FTOS# View your cache boot configuration using the command show boot system all, as shown in the following example. FTOS#show boot system all Current system image information in the system Type Boot Type A B CP DOWNLOAD BOOT 4.7.5.427 invalid RP1 DOWNLOAD BOOT 4.7.5.427 invalid RP2 DOWNLOAD BOOT 4.7.5.427 invalid linecard 0 DOWNLOAD BOOT 4.7.5.427 invalid linecard 1 is not present. linecard 2 is not present. linecard 3 is not present. linecard 4 DOWNLOAD BOOT 4.7.5.427 6.5.1.8 linecard 5 is not present. FTOS# If you attempt to cache a system image that does not support the cache boot feature, Message 8 appears. Message 8 System Image does not Support Cache Boot Error %% Error: Given image is not cache boot aware image. Verify that the system is configured to boot with the selected cache boot image using the command show bootvar as shown in the following example. FTOS#copy running-config startup-config File with same name already exist. Proceed to copy the file [confirm yes/no]: yes ! 10496 bytes successfully copied 1d6h32m: %RPM0-P:CP %FILEMGR-5-FILESAVED: Copied running-config to startup-config in flash by default R4_E300#show bootvar PRIMARY IMAGE FILE = system://4.7.5.427 SECONDARY IMAGE FILE = flash://FTOS-EF-7.7.1.0.bin DEFAULT IMAGE FILE = flash://FTOS-EF-7.6.1.0.bin LOCAL CONFIG FILE = variable does not exist PRIMARY HOST CONFIG FILE = variable does not exist SECONDARY HOST CONFIG FILE = variable does not exist PRIMARY NETWORK CONFIG FILE = variable does not exist High Availability | 391