Dell Force10 E600i FTOS Version 8.4.1.5 Configuration Guide for ExaScale - Page 1099

Flexible packet classifier hardware errors FTOS displays Message 19 in case of a parity error on an FPC. Configure an action using the command hardware monitor linecard asic fpc action-on-error. You may place the line card in a problem state, reset the card, or shutdown all ports on the card. Message 19 Parity Error %RPM0-P:CP %CHMGR-2-CARD_PARITY_ERR: Linecard 9 pp 0 FPC SRAM Hard parity error: Address 0x85000 Index 0x80000 Check the Hardware Log %E48TF:9 %POLLMGR-5-FPC_NOTIFY: Line card detected FPC 9 parity - Transient phantom %E48TF:9 %POLLMGR-5-FPC_NOTIFY: Line card detected FPC 9 parity - Transient recoverable Line card MAC hardware errors FTOS displays Message 20 in case of a port hang error. Configure an action using the command hardware monitor mac action-on-error port-shutdown. You may only shutdown all ports on the card with this command. Message 20 Port Hang Error %E48TF:9 %IFAGT-5-PORT_HUNG: Port hang detected on slot 9 port 2 %E48TF:9 %IFAGT-5-PORT_HUNG: Port hang detected on slot 9 port 26 Core dumps RPM core dumps The RPM supports two types of core dumps for RPMs-application and kernel. Kernel core dump-The E-Series supports kernel core dumps for CP and for RP1/RP2 using a naming convention of f10{cp|rp{1|2}}.kcore.gz. RP kernel core dumps are enabled by default. New files are written in flash until space is exhausted, in which case the write is aborted. CP kernel core dumps are disabled by default. Enable them using the command logging coredump cp from CONFIGURATION mode. If you use the keyword cp with this command, the system creates a file, named f10cp.kcore.gz, that preserves space on the internal flash so that there is always enough space for a core dump. Undoing this command using the no logging coredump cp removes this file. The CP kernel core dumps are overwritten every time there is a new core dump. You should manually upload kernel core dumps periodically if you want to save this information. E-Series TeraScale Debugging and Diagnostics | 1099