Dell Force10 E600i FTOS Version 8.4.1.5 Configuration Guide for ExaScale - Page 509

Use the show isis interface command in EXEC Privilege mode to view all interfaces configured with IS-IS routing along with the defaults. show isis interface G1/34 GigabitEthernet 2/10 is up, line protocol is up MTU 1497, Encapsulation SAP Routing Protocol: IS-IS Circuit Type: Level-1-2 Interface Index 0x62cc03a, Local circuit ID 1 Level-1 Metric: 10, Priority: 64, Circuit ID: 0000.0000.000B.01 Hello Interval: 10, Hello Multiplier: 3, CSNP Interval: 10 Number of active level-1 adjacencies: 1 Level-2 Metric: 10, Priority: 64, Circuit ID: 0000.0000.000B.01 Hello Interval: 10, Hello Multiplier: 3, CSNP Interval: 10 Number of active level-2 adjacencies: 1 Next IS-IS LAN Level-1 Hello in 4 seconds Next IS-IS LAN Level-2 Hello in 6 seconds LSP Interval: 33 Next IS-IS LAN Level-1 Hello in 4 seconds Next IS-IS LAN Level-2 Hello in 6 seconds LSP Interval: 33 Restart Capable Neighbors: 2, In Start: 0, In Restart: 0 FTOS# Change LSP attributes IS-IS routers flood Link state PDUs (LSPs) to exchange routing information. LSP attributes include the generation interval, maximum transmission unit (MTU) or size, and the refresh interval. You can modify the LSP attribute defaults, but it is not necessary. To change the defaults, use any or all of the following commands in ROUTER ISIS mode: Command Syntax lsp-gen-interval [level-1 | level-2] seconds lsp-mtu size lsp-refresh-interval seconds max-lsp-lifetime seconds Command Mode Purpose ROUTER ISIS ROUTER ISIS ROUTER ISIS ROUTER ISIS Set interval between LSP generation. • seconds range: 0 to 120 Default is 5 seconds. Default level is Level 1. Set the LSP size. • size range: 128 to 9195. Default is 1497. Set the LSP refresh interval. • seconds range: 1 to 65535. Default is 900 seconds. Set the maximum time LSPs lifetime. • seconds range: 1 to 65535 Default is 1200 seconds. Intermediate System to Intermediate System | 509