Dell Force10 E600i FTOS Version 8.4.1.5 Configuration Guide for ExaScale - Page 702

www.dell.com | support.dell.com Use the following commands in EXEC Privilege mode to get general route and links status information. Command Syntax show ipv6 route summary show ipv6 ospf database Command Mode Usage EXEC Privilege EXEC Privilege View the summary information of the IPv6 routes View the summary information for the OSPFv3 database Use the following command in EXEC Privilege mode to view the OSPF configuration for a neighboring router: Command Syntax show ipv6 ospf neighbor Command Mode Usage EXEC Privilege View the configuration of OSPFv3 neighbors. Use the following command in EXEC Privilege mode to configure the debugging options of an OSPFv3 process: Command Syntax Command Mode Usage debug ipv6 ospf packet EXEC Privilege {type slot/port} View debug messages for all OSPFv3 interfaces. • packet: view OSPF packet information. • For a Gigabit Ethernet interface, enter the keyword GigabitEthernet followed by the slot/port information (e.g. passive-interface gi 2/1). • For a port channel, enter the keyword port-channel followed by a number from 1 to 255 for TeraScale and ExaScale(e.g. passive-interface po 100) • For a 10-Gigabit Ethernet interface, enter the keyword TenGigabitEthernet followed by the slot/port information ( e.g. passive-interface ten 2/3). • For a VLAN, enter the keyword vlan followed by a number from 1 to 4094 (e.g. passive-interface vlan 2222). E-Series ExaScale platforms support 4094 VLANs with FTOS version 8.2.1.0 and later. Earlier ExaScale supports 2094 VLANS. 702 | Open Shortest Path First (OSPFv2 and OSPFv3)