Dell Force10 S25N-S50N FTOS Command Line Reference Guide FTOS 8.4.2.7 E-Series - Page 1013

Command Modes Command History EXEC Privilege Version 7.8.1.0 Version 7.6.1.0 Version 7.5.1.0 pre-Version 6.1.1.1 Introduced support for Multi-Process OSPF. Introduced on S-Series Introduced on C-Series Introduced on E-Series Example Figure 38-1. Command example: debug ip ospf process-id packet FTOS#debug ip ospf 1 packet OSPF process 90, packet debugging is on FTOS# 08:14:24 : OSPF(100:00): Xmt. v:2 t:1(HELLO) l:44 rid:192.1.1.1 aid:0.0.0.1 chk:0xa098 aut:0 auk: keyid:0 to:Gi 4/3 dst:224.0.0.5 netmask:255.255.255.0 pri:1 N-, MC-, E+, T-, hi:10 di:40 dr:90.1.1.1 bdr:0.0.0.0 Table 38-1. Output Descriptions for debug ip ospf process-id packet Field 8:14 OSPF v: t: l: rid: aid: chk: aut: auk: keyid: to: dst: netmask: pri: Description Displays the time stamp. Displays the OSPF process ID: instance ID. Displays the OSPF version. FTOS supports version 2 only. Displays the type of packet sent: • 1 - Hello packet • 2 - database description • 3 - link state request • 4 - link state update • 5 - link state acknowledgement Displays the packet length. Displays the OSPF router ID. Displays the Autonomous System ID. Displays the OSPF checksum. States if OSPF authentication is configured. One of the following is listed: • 0 - no authentication configured • 1 - simple authentication configured using the ip ospf authentication-key command) • 2 - MD5 authentication configured using the ip ospf message-digest-key command. If the ip ospf authentication-key command is configured, this field displays the key used. If the ip ospf message-digest-key command is configured, this field displays the MD5 key Displays the interface to which the packet is intended. Displays the destination IP address. Displays the destination IP address mask. Displays the OSPF priority Open Shortest Path First (OSPFv2 and OSPFv3) | 1013