Dell Force10 S25N-S50N FTOS Command Line Reference Guide FTOS 8.4.2.7 E-Series - Page 664

www.dell.com | support.dell.com ip-address mask [longer-prefix] summary (OPTIONAL) Enter the IP address and mask of a route to CAM entries for that route only. Enter the keyword longer-prefixes to view routes with a common prefix. (OPTIONAL) Enter the keyword summary to view a table listing route prefixes and the total number routes which can be entered in to CAM. Command Modes EXEC EXEC Privilege Command History Version 7.7.1.0 Version 7.6.1.0 Modified: Added support for up to seven stack members. Introduced on S-Series Example Figure 24-12. show ip cam stack-unit Command Example FTOS#show ip cam stack-unit 0 port-set 0 10.10.10.10/32 longer-prefixes Destination EC CG V C VId Mac-Addr Port 10.10.10.10 0 011 0 00:00:00:00:00:00 3f01 CP FTOS# Table 24-9. show ip cam Command Example Fields Field Destination EC CG V C V Id Mac Addr Port Description Displays the destination route of the index. Displays the number of equal cost multipaths (ECMP) available for the default route for non-Jumbo line cards. Displays 0,1 when ECMP is more than 8, for Jumbo line cards. Displays 0. Displays a 1 if the entry is valid and a 0 otherwise. Displays the CPU bit. 1 indicates that a packet hitting this entry is forwarded to the control processor, depending on Egress port. Displays the VLAN ID. If the entry is 0, the entry is not part of a VLAN. Displays the next-hop router's MAC address. Displays the egress interface. Use the second half of the entry to determine the interface. For example, in the entry 17cl CP, the CP is the pertinent portion. CP = control processor Gi = Gigabit Ethernet interface Te = 10 Gigabit Ethernet interface show ip fib linecard c e View all Forwarding Information Base (FIB) entries. Syntax show ip fib linecard slot-number [vrf vrf instance | ip-address/prefix-list | summary] 664 | IPv4 Routing