Dell Force10 S25N-S50N FTOS Command Line Reference Guide FTOS 8.4.2.7 E-Series - Page 1150
source remote port mirroring, source, range, destination remote vlan, direction, direction {rx, both}
View all Dell Force10 S25N-S50N manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 1150 highlights
www.dell.com | support.dell.com source (remote port mirroring) e x Configure one or more source ports, the ingress/egress traffic to be mirrored, and the reserved L2 VLAN used to transport mirrored traffic. Syntax Parameters source {single-interface | vlan vlan-id | range {interface-list | interface-range | mixed-interface-list | vlan-list | vlan-range | mixed-vlan-list}} destination remote vlan vlan-id direction {rx | tx | both} single-interface vlan vlan-id range interface-list range interface-range range mixed-interface-list range vlan-list range vlan-range range mixed-vlan-list destination remote-vlan vlan-id direction {rx | tx | both} Specifies one of the following interface types: • 1-Gigabit Ethernet: Enter gigabitethernet slot/port. • 10-Gigabit Ethernet: Enter tengigabitethernet slot/port. • Port channel: Enter port-channel {1-511}. Specifies a single VLAN ID. Range: 1-4094 Specifies multiple interfaces separated by a comma and space: single-interface, single-interface, single-interface... For example: source range port-channel 2, gigabitethernet 3/4 Specifies one of the following interface ranges: • gigabitethernet slot/first_port - last_port • tengigabitethernet slot/first_port - last_port • port-channel first_number - last_number A space is required before and after the dash (-). For example: source range gigabitethernet 1/2 - 4 Or: source range port-channel 1 - 12 Specifies single interfaces and interface ranges in any order: range single-interface, interface-range, single-interface... For example: source range port-channel 2, gigabitethernet 3/4 - 5 Specifies multiple source VLANs separated by a comma and space: range vlan vlan-id, vlan vlan-id, vlan vlan-id... For example: source range vlan 2, vlan 12, vlan 22 Specifies a range of source VLANs in the format: range vlan first_vlanID - last_vlanID. A space is required before and after the dash (-). For example: source range vlan 9-11 Specifies single VLANs and VLAN ranges in any order: range vlan vlan-id, vlan first_vlanID - last_vlanID, vlan vlan-id... For example: source range vlan 2, vlan 10 - 11, vlan 5 Associates the reserved L2 VLAN with the source ports used in the source session. Valid VLAN IDs are 1 to 4094. The default VLAN ID is not supported. Specifies the direction of the traffic to be mirrored: rx: incoming packets only tx: outgoing packets only both: both incoming and outgoing packets Defaults No default behavior or values 1150 | Port Monitoring