Dell Force10 S25N-S50N FTOS Command Line Reference Guide FTOS 8.4.2.7 E-Series - Page 201
show dot1x interface
View all Dell Force10 S25N-S50N manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 201 highlights
show dot1x interface c e s Display the 802.1X configuration of an interface. Syntax show dot1x interface interface [mac-address mac-address] Parameters interface mac-address Enter one of the following keywords and slot/port or number information: • For a Gigabit Ethernet interface, enter the keyword GigabitEthernet followed by the slot/port information. • For a Fast Ethernet interface, enter the keyword FastEthernet followed by the slot/port information. • For a Ten Gigabit Ethernet interface, enter the keyword TenGigabitEthernet followed by the slot/port information. (Optional) MAC address of a supplicant. Defaults No default values or behavior Command Modes EXEC EXEC privilege Command History Version 8.4.2.1 Version 7.6.1.0 Introduced mac-address option on the C-Series and S-Series Introduced on C-Series, E-Series, and S-Series Usage C-Series and S-Series only: Enter a supplicant's MAC address using the mac-address option to Information display information only on the 802.1X-enabled port to which the supplicant is connected. If 802.1X multi-supplicant authentication is enabled on a port, additional 802.1X configuration details (port authentication status, untagged VLAN ID, authentication PAE state, and backend state) are displayed for each supplicant as shown in Figure 8-4. Example Figure 8-2. show dot1x interface Command Example FTOS#show dot1x int Gi 2/32 802.1x information on Gi 2/32: Dot1x Status: Enable Port Control: AUTO Port Auth Status: UNAUTHORIZED Re-Authentication: Disable Untagged VLAN id: None Guest VLAN: Enable Guest VLAN id: 10 Auth-Fail VLAN: Enable Auth-Fail VLAN id: 11 Auth-Fail Max-Attempts: 3 Tx Period: 30 seconds Quiet Period: 60 seconds ReAuth Max: 2 Supplicant Timeout: 30 seconds Server Timeout: 30 seconds Re-Auth Interval: 3600 seconds Max-EAP-Req: 2 Auth Type: SINGLE_HOST Auth PAE State: Backend State: Initialize Initialize FTOS# 802.1X | 201