Dell Force10 S25N-S50N FTOS Command Line Reference Guide FTOS 8.4.2.7 E-Series - Page 1483

Figure 63-3. Command Example: show vrrp FTOS>show vrrp GigabitEthernet 12/3, VRID: 1, Net: 10.1.1.253 VRF: 0 default-vrf State: Master, Priority: 105, Master: 10.1.1.253 (local) Hold Down: 0 sec, Preempt: TRUE, AdvInt: 1 sec Adv rcvd: 0, Adv sent: 1862, Gratuitous ARP sent: 0 Virtual MAC address: 00:00:5e:00:01:01 Virtual IP address: 10.1.1.252 Authentication: (none) Tracking states for 1 interfaces: Up GigabitEthernet 12/17 priority-cost 10 GigabitEthernet 12/4, VRID: 2, Net: 10.1.2.253 VRF: 0 default-vrf State: Master, Priority: 110, Master: 10.1.2.253 (local) Hold Down: 10 sec, Preempt: TRUE, AdvInt: 1 sec Adv rcvd: 0, Adv sent: 1862, Gratuitous ARP sent: 0 Virtual MAC address: 00:00:5e:00:01:02 Virtual IP address: 10.1.2.252 Authentication: (none) Tracking states for 2 interfaces: Up GigabitEthernet 2/1 priority-cost 10 Up GigabitEthernet 12/17 priority-cost 10 GigabitEthernet 7/30, IPv6 VRID: 3, Version: 3, Net: fe80::201:e8ff:fe01:95cc VRF: 0 default-vrf State: Master, Priority: 100, Master: fe80::201:e8ff:fe01:95cc (local) Hold Down: 0 centisec, Preempt: TRUE, AdvInt: 100 centisec Accept Mode: FALSE, Master AdvInt: 100 centisec Adv rcvd: 0, Bad pkts rcvd: 0, Adv sent: 310 Virtual MAC address: 00:00:5e:00:02:01 Virtual IP address: 2007::1 fe80::1 Tracking states for 2 resource Ids: 2 - Up IPv6 route, 2040::/64, priority-cost 20, 00:02:11 3 - Up IPv6 route, 2050::/64, priority-cost 30, 00:02:11 Table 63-2. Command Example Description: show vrrp Line Beginning with Description GigabitEthernet... VRF State: master... Hold Down:... Displays the Interface, the VRRP group ID, and the network address. If the interface is no sending VRRP packets, 0.0.0.0 appears as the network address. VRF instance to which the interface (on which the VRRP group is configured) belongs Displays the interface's state: • Na/If (not available), • master (MASTER virtual router) • backup (BACKUP virtual router) the interface's priority and the IP address of the MASTER. This line displays additional VRRP configuration information: • Hold Down displays the hold down timer interval in seconds. • Preempt displays TRUE if preempt is configured and FALSE if preempt is not configured. • AdvInt displays the Advertise Interval in seconds. Virtual Router Redundancy Protocol (VRRP) | 1483