Dell Force10 S25N-S50N FTOS Command Line Reference Guide FTOS 8.4.2.7 E-Series - Page 1250

www.dell.com | support.dell.com Example Figure 48-3. show ip rip database Command Example (partial) FTOS#show ip rip database Total number of routes in RIP database: 1624 204.250.54.0/24 [50/1] via 192.14.1.3, 00:00:12, GigabitEthernet 9/15 204.250.54.0/24 auto-summary 203.250.49.0/24 [50/1] via 192.13.1.3, 00:00:12, GigabitEthernet 9/14 203.250.49.0/24 auto-summary 210.250.40.0/24 [50/2] via 1.1.18.2, 00:00:14, Vlan 18 [50/2] via 1.1.130.2, 00:00:12, Port-channel 30 210.250.40.0/24 auto-summary 207.250.53.0/24 [50/2] via 1.1.120.2, 00:00:55, Port-channel 20 [50/2] via 1.1.130.2, 00:00:12, Port-channel 30 [50/2] via 1.1.10.2, 00:00:18, Vlan 10 207.250.53.0/24 auto-summary 208.250.42.0/24 [50/2] via 1.1.120.2, 00:00:55, Port-channel 20 [50/2] via 1.1.130.2, 00:00:12, Port-channel 30 [50/2] via 1.1.10.2, 00:00:18, Vlan 10 208.250.42.0/24 auto-summary Table 48-1. Fields in show ip rip database Command Output Field Description Total number of routes in RIP database 100.10.10.0/24 directly connected 150.100.0.0 redistributed 209.9.16.0/24... Displays the number of RIP routes stored in the RIP database. Lists the route(s) directly connected. Lists the routes learned through redistribution. Lists the routes and the sources advertising those routes. show running-config rip c e s Use this feature to display the current RIP configuration. Syntax show running-config rip Defaults No default values or behavior Command Modes EXEC Privilege Example Figure 48-4. show running-config rip Command Example show running-config rip ! router rip distribute-list Test1 in distribute-list Test21 out network 10.0.0.0 passive-interface GigabitEthernet 2/0 neighbor 20.20.20.20 redistribute ospf 999 version 2 1250 | Router Information Protocol (RIP)