Dell PowerConnect 5448 User's Guide - Page 104
Tech Support., IPv6 Address Type
View all Dell PowerConnect 5448 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 104 highlights
- Warning - A system warning has occurred. - Notice - The system is functioning properly, but system notice has occurred. - Informational - Provides device information. - Debug - Provides detailed information about the log. If a Debug error occurs, contact Customer Tech Support. • Delete Server - Deletes the currently selected server from the Available Servers list, when selected. • Severity to Include - Indicates the log severity level to be reported by the remote server. The possible field values: - Emergency - The highest warning level. If the device is down or not functioning properly, an emergency log message is saved to the specified logging location. - Alert - The second highest warning level. An alert log is saved if there is a serious device malfunction, for example, all device features are down. - Critical - The third highest warning level. A critical log is saved if a critical device malfunction occurs, for example, two device ports are not functioning, while the rest of the device ports remain functional. - Error - A device error has occurred, for example, if a single port is offline. - Warning - The lowest level of a device warning. The device is functioning, but an operational problem has occurred. - Notice - Provides device information. - Informational - Provides device information. - Debug - Provides debugging messages. The Remote Log Server Settings page also contains a severity list. The severity definitions are the same as the severity definitions in the Global Log Parameters page. When adding a Log Server, the following additional parameters are available: • Supported IP Format - Specifies the IP format supported by the server. The possible values are: - IPv6 - IP version 6 is supported. - IPv4 - IP version 4 is supported. • IPv6 Address Type - When the server supports IPv6 (see previous parameter), this specifies the type of static address supported. The possible values are: - Link Local - A Link Local address that is non-routable and used for communication on the same network only. - Global - A globally unique IPv6 address; visible and reachable from different subnets. • Link Local Interface - When the server supports an IPv6 Link Local address (see previous parameter), this specifies the the Link Local interface. The possible values are: - VLAN1 - The IPv6 interface is configured on VLAN1. - ISATAP - The IPv6 interface is configured on ISATAP tunnel. 104 Configuring System Information