Dell PowerConnect 5448 User's Guide - Page 46

Wizard Step 3 The following is displayed: Next, an IP address is setup. The IP address is defined on the default VLAN (VLAN #1), of which all ports are members. This is the IP address you use to access the CLI, Web interface, or SNMP interface for the switch.To setup an IP address: Please enter the IP address of the device (A.B.C.D):[1.1.1.1] Please enter the IP subnet mask (A.B.C.D or nn): [255.255.255.0] Enter the IP address and IP subnet mask, for example 1.1.1.1 as the IP address and 255.255.255.0 as the IP subnet mask. Press Enter. Wizard Step 4 The following is displayed: Finally, setup the default gateway. Please enter the IP address of the gateway from which this network is reachable (e.g. 192.168.1.1).Default gateway (A.B.C.D):[0.0.0.0] Enter the default gateway. Press Enter. The following is displayed (as per the example parameters described): This is the configuration information that has been collected: SNMP Interface = [email protected] User Account setup = admin Password = * Management IP address = 1.1.1.1 255.255.255.0 Default Gateway = 1.1.1.2 Wizard Step 5 The following is displayed: If the information is correct, please select (Y) to save the configuration, and copy to the start-up configuration file. If the information is incorrect, select (N) to discard configuration and restart the wizard: (Y/N)[Y]Y 46 Starting and Configuring the Device