Dell PowerConnect 5448 User's Guide - Page 153
management access-list, permit, ethernet g9
View all Dell PowerConnect 5448 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 153 highlights
Table 6-30. Access Profiles CLI Commands (continued) CLI Command Description permit ip-source {ipv4-address | ipv6-address / prefix-length} Sets port permitting conditions for the management [mask mask | prefix-length] [ethernet interface-number | access list, and the selected management method. vlan vlan-id | port-channel number] [service service] deny [ethernet interface-number | vlan vlan-id | portchannel number] [service service] Sets port denying conditions for the management access list, and the selected management method. deny ip-source {ipv4-address | ipv6-address / prefix-length} Sets port denying conditions for the management [mask mask | prefix-length] [ethernet interface-number | access list, and the selected management method. vlan vlan-id | port-channel number] [service service] management access-class {console-only | name} Defines which access-list is used as the active management connections. show management access-list [name] Displays the active management access-lists. show management access-class Displays information about management access-class. The following is an example of the CLI commands: Console (config)# management access-list mlist Console (config-macl)# permit ethernet g1 Console (config-macl)# permit ethernet g9 Console (config-macl)# deny ethernet g2 Console (config-macl)# deny ethernet g10 Console (config-macl)# exit Console (config)# management access-class mlist Console (config)# exit Console# show management access-list mlist ----permit ethernet g1 permit ethernet g9 ! (Note: all other access implicitly denied) Console> show management access-class Management access-class is enabled, using access list mlist Configuring System Information 153