Dell PowerConnect 5448 User's Guide - Page 237
Defining iSCSI Targets Using CLI Commands, Apply Changes, iSCSI Targets Table, Remove - show port command
View all Dell PowerConnect 5448 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 237 highlights
3 Fill in the parameters. 4 Click Apply Changes. Removing Targets 1 Open the iSCSI Targets Table. 2 In the table, check the Remove checkbox next to each target to be removed. 3 Click Apply Changes. Defining iSCSI Targets Using CLI Commands The following table summarizes the equivalent CLI commands for defining fields displayed in the iSCSI Targets Table. Figure 6-110. iSCSI Targets Table CLI Commands CLI Command Description iscsi target port tcp-port-1 [tcpport-2... tcp-port-8] [address ip-address] [name targetname] To configure iSCSI port/s, target address and name, use the iscsi target port command in global configuration mode. To delete iSCSI port/s, target, use the no form of this command. no iscsi target port To delete iSCSI port/s, target, use this no form tcp-port-1 [tcp-port- of the command. 2... tcp-port-8] [address ip-address] show iscsi sessions Show the current iSCSI sessions. Configuring System Information 237