Dell PowerConnect 5448 User's Guide - Page 277
Apply Changes, Configuring DHCP Snooping Binding Database with CLI Commands, DHCP Snooping Binding
View all Dell PowerConnect 5448 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 277 highlights
Figure 7-21. Bind DHCP Snooping Page 3 Define the fields. 4 Click Apply Changes. Configuring DHCP Snooping Binding Database with CLI Commands The following table summarizes the equivalent CLI commands for configuring DHCP Snooping Binding Database . Table 7-11. DHCP Snooping Binding Database CLI Commands CLI Command Description ip dhcp snooping binding mac-address vlan-id ip-address {ethernet interface | port-channel port-channel-number} expiry seconds no ip dhcp snooping binding mac-address vlan-id Use the ip dhcp snooping binding privileged EXEC command to configure the DHCP snooping binding database and to add binding entries to the database. Use the no form of this command to delete entries from the binding database. clear ip dhcp snooping database Use the clear ip dhcp snooping database privileged EXEC command to clear the DHCP binding database. show ip dhcp snooping binding [mac-address mac-address] Use the show ip dhcp snooping binding user EXEC [ip-address ip-address] [vlan vlan] [ethernet interface | port- command to display the DHCP snooping binding database channel port-channel-number] and configuration information for all interfaces on a switch. The following is an example of some of the CLI commands: Console# show ip dhcp snooping binding Update frequency: 1200 Total number of binding: 2 Mac Address ----------0060.704C.73FF 0060.704C.7BC1 IP Address ----------10.1.8.1 10.1.8.2 Lease (sec) ----------7983 92332 Type -------snooping snooping VLAN -------3 (s)3 Interface ------1/21 1/22 Configuring Device Information 277