Dell PowerConnect 5448 User's Guide - Page 354
Defining LAG Membership, lacp system-priority, interface ethernet, lacp timeout long
View all Dell PowerConnect 5448 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 354 highlights
The following is an example of the CLI commands: Console (config)# lacp system-priority 120 Console (config)# interface ethernet g1 Console (config-if)# lacp port-priority 247 Console (config-if)# lacp timeout long Console (config-if)# end Console# show lacp ethernet g1 statistics Port g1 LACP Statistics: LACP PDUs sent:2 LACP PDUs received:2 Defining LAG Membership The LAG Membership page contains fields for assigning ports to LAGs. LAGs can include up to 8 ports.When a port is added to a LAG, the port acquires the LAG's properties. If the port cannot be configured with the LAG properties, a trap is generated and the port operates with its default settings. The LAG Membership page contains fields for assigning ports to LAGs. To open the LAG Membership page, click Switch→ Link Aggregation→ LAG Membership in the tree view. Figure 7-54. LAG Membership • LACP - Aggregates the port to a LAG, using LACP. • LAG - Adds a port to a LAG, and indicates the specific LAG to which the port belongs. 354 Configuring Device Information