Dell PowerConnect 5448 User's Guide - Page 124
Domain Name Query Interval, ISATAP Router Solicitation Interval
View all Dell PowerConnect 5448 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 124 highlights
Figure 6-32. IPv6 ISATAP Tunnel • ISATAP Status - Specifies the status of ISATAP on the device. The possible field values are: - Enable - ISATAP is enabled on the device. - Disable - ISATAP is disabled on the device. This is the default value. • IPv4 Address - Specifies the local (source) IPv4 address of a tunnel interface. • Tunnel Router's Domain Name - Specifies a global string that represents a specific automatic tunnel router domain name. The default value is ISATAP. - Use Default - Selecting the check box returns settings to default. • Domain Name Query Interval - Specifies the interval between DNS Queries (before the IP address of the ISATAP router is known) for the automatic tunnel router domain name. The range is 10 - 3600 seconds. The default is 10 seconds. - Use Default - Selecting the check box returns settings to default. • ISATAP Router Solicitation Interval - Specifies the interval between router solicitations messages when there is no active router. The range is 10 - 3600 seconds. The default is 10. - Use Default - Selecting the check box returns settings to default. • ISATAP Robustness - Specifies the number of DNS Query/ Router Solicitation refresh messages that the device sends. The range is 1 - 20 seconds. The default is 3. - Use Default - Selecting the check box returns settings to default. 124 Configuring System Information