Dell PowerConnect 5448 User's Guide - Page 33
Mounting the Device, Overview, Mounting the System
View all Dell PowerConnect 5448 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 33 highlights
Mounting the Device Overview The power connectors for the device are positioned on the back panel. Connecting a DC Redundant Power Supply (UPS) is optional, but is recommended. The UPS DC connector is located on the back panel of the device. Mounting the System Device Rack Installation WARNING: Disconnect all cables from the unit before mounting the device in a rack or cabinet. WARNING: When mounting multiple devices into a rack, mount the devices from the bottom up. 1 Place the supplied rack-mounting bracket on one side of the device ensuring the mounting holes on the device line up to the mounting holes on the rack mounting bracket. Figure 3-1 illustrates where to mount the brackets. Figure 3-1. Connection Rack Mounting Brackets 2 Insert the supplied screws into the rack mounting holes and tighten with a screwdriver. 3 Repeat the process for the rack-mounting bracket on the other side of the device. Installing the PowerConnect Device 33