Dell PowerConnect 5448 User's Guide - Page 364
Bridge Multicast Forward All, VLAN ID, Ports, Apply Changes
View all Dell PowerConnect 5448 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 364 highlights
Attaching a Port to a Multicast Router or Switch 1 Open Bridge Multicast Forward All page. 2 Define the VLAN ID field. 3 Select a port in the Ports table, and assign the port a value. 4 Click Apply Changes. The port is attached to the Multicast router or switch. Attaching a LAG to a Multicast Router or Switch 1 Open Bridge Multicast Forward All page. 2 Define the VLAN ID field. 3 Select a port in the LAGs table, and assign the LAG a value. 4 Click Apply Changes. The LAG is attached to the Multicast router or switch. Managing LAGs and Ports Attached to Multicast Routers Using CLI Commands The following table summarizes the equivalent CLI commands for managing LAGs and ports attached to Multicast routers as displayed on the Bridge Multicast Forward All page. Table 7-40. CLI Commands for Managing LAGs and Ports Attached to Multicast Routers CLI Command show bridge multicast filtering vlan-id no bridge multicast forbidden forward-all bridge multicast forward-all {add | remove} {ethernet interface-list | port-channel port-channel-number-list} Description Displays the Multicast filtering configuration. Disables forwarding Multicast packets on a port. Enables forwarding of all Multicast packets on a port. Use the no form of this command to return to default. 364 Configuring Device Information