Dell PowerConnect 5448 User's Guide - Page 86
Defining SNTP Servers
View all Dell PowerConnect 5448 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 86 highlights
Deleting the Authentication Key 1 Open the SNTP Authentication page. 2 Click Show All. The Authentication Key Table opens. 3 Select an Authentication Key Table entry. 4 Select the Remove check box. 5 Click Apply Changes. The entry is removed, and the device is updated. Defining SNTP Authentication Settings Using CLI Commands The following table summarizes the equivalent CLI commands for setting fields displayed in the SNTP Authentication page. Table 6-7. SNTP Authentication CLI Commands CLI Command sntp authenticate sntp authentication-key number md5 value Description Defines authentication for received Network Time Protocol traffic from servers. Defines an authentication key for SNTP. The following is an example of the CLI commands: console> enable console# configure Console(config)# sntp authentication-key 8 md5 ClkKey Console(config)# sntp trusted-key 8 Console(config)# sntp authenticate Defining SNTP Servers The SNTP Servers page contains information for enabling SNTP servers, as well as adding new SNTP servers. In addition, the SNTP Servers page enables the device to request and accept SNTP traffic from a server. To open the SNTP Servers page, click System → SNTP → SNTP Servers in the tree view. 86 Configuring System Information